Benefits
Advantages of
electric towel rails
Timer Regulator
INNOVATIVE - ECO MODE
When is it needed?
• If you have young children who learn about the world and like pressing buttons;
• If you are a hotel owner – for a reasonable allocation of resources;
• If you are scurrying and may simply forget to turn off the towel rail after use.
To activate this mode you need:
– press the timer and temperature buttons simultaneously for 5 seconds, after which the towel rail will switch off.
– then turn it on in the usual way. Done, the timer runs for 3 or 6 hours!
To return to the constant heating mode, you should perform the same steps again.
CONNECTOR
Mario ME Ltd
Our customers don’t need to think in advance about the side of the socket, and the best placement for the electric towel rail. Because the unique development – connector by Mario – allows you to connect the electric towel rail with a dry heater to the power any side.
You no longer need to guess which connection side will be more demanded for your customers; you no longer need to worry that something is not in stock; since each model of the electric towel rail equipped with a connector is versatile and will suit everyone.
mirrorpolishing
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas ut diam augue.
Сертифікат обмеження небезпечних речовин
Сертифікат електромагнітної сумісності
Сертифікат низької напруги
Сертифікат ступеня захисту
shut-off valve
the crane under TEN
the crane angular extended
tap corner square
mirrorpolishing
Pipe cutting
Before production begins, it is necessary to cut the pipe into the relevant segments according to the drawings of future products. Stainless steel pipes require very precise cutting equipment to reduce inaccuracies in connections, waste and use raw materials with maximum efficiency.
Grinding
Grinding allows to smooth the surface of the pipe, remove roughness and prepare it for welding. Grinding is done automatically on a European equipped machine using abrasives. This step of grinding also allows us to identify the smallest defects before welding and to eliminate the possibility of loss of the highest quality product. After satisfactory grinding control, the pipe is ready for further processing.
Welding
We use handmade and robotic welding. All welding work takes place in an argon atmosphere (argon-arc welding), which requires high-quality welders, special welding workstations and robotic high-quality equipment. Each welding seam is checked separately visually and technically.
Pressure check
Each product undergoes a pressure test of 22 bars by air to ensure the high quality of the work of welding masters and absence of leakage. This pressure check is not the first or last, but undoubtedly is the most important of all next check steps.
Welds cleaning
Handling of weld seams after welding gives elegant and neat appearance of products. Definitely a lot attention is paid to this stage of production. We care about the quality of our products, so we clean all welds seams manually, providing an excellent coupling of ribs.
Electropolishing
We polish products in special baths by electrolysis to a mirror finish. This emphasizes the nobleness as well strength of stainless steel and removes any scratches received during the manufacturing of the product.
